D63:Steering Linkage Stabalizer

With all the steering linkage put together, next up was the stabilizer to keep all the linkage in place. I used the 2 plastic bushings from the linkage of both donors. The challenge was figuring out how to integrate these into a new mount.

Below, is the top portion, that holds the plastic bushing to the mount. The next photo shows the mount with this top holder in place.

The mount with bushings installed along with the steering linkage that it'll hold. The left side has the top cap and the right does not.

The linkage and mount installed in the car.

... and finally my first attempt at a video in this blog. The entire steering system working together.